Find and Program Your Remote Control

Charter OCAP-4

Programming Device Control

The OCAP-4 Remote Control is preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps:

1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
   • Note: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. On the remote control, press a device key once (i.e., AUX, DVD, TV, CBL or STB); it blinks once. Then press and hold SETUP until the selected mode key blinks twice.
3. Use the 'Manufacturer's Codes' to locate the type of device and brand name and then enter the first five-digit code for your device. If performed correctly, the selected mode key blinks twice.
   • Note: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.
4. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see 'Searching for Your Code').
   • Note: If the device does not have a PWR key, press the PLAY key.
5. Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code.

Searching For Your Code

If your home entertainment device does not respond to the OCAP-4 Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.
Use the following device code digits to control a specific device:

• 0 = Cable/STB
• 1 = TV
• 2 = DVD/VCR
• 3 = Audio

For example, to search for a code for your TV:

1. Turn on your TV.
2. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice.
3. Enter 9 9 1. The TV key blinks twice.
4. Press 1. (the device code digit for your TV). The TV key blinks twice. Aim the remote control at the TV and press PWR once.
5. Press and release the CH+ key continuously, then stop when the TV turns off.
   • Note: In the search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first.
6. Press PWR. The TV should turn on, then press SETUP to lock in the code.
   • Note: If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SETUP when the TV turns on.
7. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are searching for.

Checking The Codes

1. If you have set up the OCAP-4 Remote Control by searching for your device code, you may need to find out which five-digit code is operating your equipment.
2. For example, to find out which code is operating your TV:
3. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice.
4. Enter 9 9 0. The TV key blinks twice.
5. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = and write down the number.
   • Note: If a code digit is 0, the selected mode key does not blink.
6. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit. Finish writing down the codes.
7. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are checking. Write down the codes.

Moxi Remote MC3

Programming the TV with codes

Program the Moxi remote to control TV power and volume, as well as power, volume, and mute for an audio device.

Some older devices may not be supported. If the device fails to respond to any code, use its original remote to control it.

1. In front of the TV, press and hold the Moxi and OK buttons simultaneously on the Moxi remote, until the LED at the top of the remote blinks twice.
2. Using the number buttons on the remote, enter one of the codes for your device that you wrote down or from the reference tables starting on page 61. When you enter a code correctly, the LED blinks twice. If it blinks once, the code was invalid; try entering the code again. If the code was correct for your device, then the device responds automatically (turns on or off).
3. If the TV or device does not respond, start over using another listed code. Repeat until successful, or see Programming by search.

Programming the TV by search

If the TV or audio device is not listed, or the codes listed do not work, try programming by search. Programming by search allows the remote to cycle through codes to find one that works with the TV or audio device.

Once programmed with two device codes, the remote controls power for the TV and the second audio device, as well as volume and mute for the second (audio) device.

Some older devices may not be supported. If the device fails to respond to any code, use its original remote to control it.

1. In front of the device, press and hold the Moxi and OK buttons simultaneously on the Moxi remote, until the LED at the top of the remote blinks twice.\
2. Slowly, press the ch+ button repeatedly to advance through the code list until the device responds (turns on or off).
3. Once the device responds, press the OK button to set the current code.
4. Press the power button on the remote control. If the device does not respond, repeat the previous steps pressing the ch+ button more slowly.

Programming the Moxi Remote to the Moxi Receiver

The remote will need to be programmed for any of the following to operate it: Moxi MP12, BMC9012, BMC9012F or BMC 9022. Use the following steps to program the remote to the Moxi receiver.  

1. Turn on the Moxi box.
2. Press and hold the MOXI and OK buttons on the remote until the red LED at the top of the remote blinks twice.  
3. After the red LED has blinked twice, release both buttons.
4. Using the numbers on the remote, slowly enter 0, 0, 4. The red LED  at the top of the remote will blink twice.  Note: Once the LED blinks twice at the end of step 4, try using the remote to change channels or use other functions of the Moxi receiver.

Additional programming features

To view which device you have programmed for a specific remote control key:

1. Press the Moxi button and OK buttons.
2. Press the info button, and then press any one of the four programmable keys (such as, vol+/-, mute, or power).
3. The LED light for the power button blinks back the code, blinking the number of times equal to the first digit of the code, then pausing before blinking the number of times equal to the second digit in the code, and so forth. For the digit 0, the LED blinks rapidly several times.
4. The default settings for the vol+/- and mute buttons control the TV when there is not an audio device programmed. When an audio device is programmed, then the default settings for the vol +/- and mute buttons are controlled through that device.

To reset the Moxi remote to the original factory settings:

Press the Moxi plus OK buttons simultaneously and hold until the LED light blinks twice, and then press clear, clear, clear.

NOTE: PROCEED WITH CAUTION! Be aware that this will erase all settings, previously recorded programs and any future recordings scheduled on the box.

Charter 1060BC2/1060BC3

Programming the TV with codes

The Charter 1060BC3 Remote Control is preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.

NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and perform the instructions on "Setting Up a Combo Unit". Also refer to "Function Key Chart" on this page to find out which devices can be programmed onto each device key.

1. Turn on a device and, if applicable, insert videomedia, (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program before moving on to step 2.

2. On the remote control, press a device key once (i.e., AUX, DVD, TV, CBL, or STB); it blinks once. Then press and hold SET UP until the selected mode key blinks twice.
3. Use the "Setup Codes for Televisions" on page 2) to locate the type of device and brand name and then enter the first five-digit code for your device. If performed correctly, the selected mode key blinks twice.

NOTE: If the selected mode key emits a long blink, the entry is invalid.

Repeat steps 2 through 3 and try entering the same code again.

4. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see "Searching for Your Code").

NOTE: If the device does not have a POWER key, press the (Play) key.

5. Repeat steps 1 through 4 for each device you want the remote control to operate.

Setting Up a Combo Unit

If you own a combo unit such as a TV/DVDCombo or a TV/VCR Combo, you need to follow special steps to set it up. Perform the following instructions to control combo device:

1. For a TV/DVD Combo, turn on your TV/DVD Combo and insert a DVD. (For a TV/VCR Combo, insert a videocassette).
2. On the remote control, press DVD once; it blinks once. Then press and hold SET UP until the DVD key blinks twice.
3. Use the "Setup Codes for Televisions" starting on page 2 to locate the brand name and enter the first five-digit code for your combo device (for example, TV/VCR). If you perform this procedure correctly, the DVD key blinks twice.

NOTE: If the DVD key did not blink twice after entering the code's last digit, repeat steps 2 through 3 and try entering the same code again.

If you've located a setup code that works for your combo device (for example, a TV/DVD Combo) and a separate TV code is also listed, you'll need to program this code into the remote control to access volume control (See "Programming Device Control").

4. Aim the remote control at your combo device (for example, TV/ DVDCombo) and press POWER once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (See "Searching for Your Code").
   

Searching for Your Code

If your home entertainment device does not respond to the Charter 1060BC3 Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

NOTE: Use the following device code digits to control a specific device:

• 0 = Cable (dedicated to cable only)
• 1=TV
• 2 = DVD/VCR
• 3 = Audio

For example, to search for a code for your TV:

1. Turn on your TV.
2. On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice.
3. Enter 9 9 1. The TV key blinks twice.
4. Press 1 (the device code digit for your TV). The TV key blinks twice. Aim the remote control at the TV and press POWER once.
5. Press and release the CH+ key continuously, then stop when the TV turns off.

NOTE: In the searchmode, the remote control sends IR codes fromits library to the selected device, starting with the most popular code first.

6. Press POWER. The TVshould turn on, then press SET UP to lock in the code.

NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SET UP when the TV turns on.

7. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are searching for.
   CHECKING THE CODES If you have set up the Charter 1060BC3 Remote Control by searching for your device code, you may need to find out which five-digit code is operating your equipment.

For example, to find out which code is operating your TV:

1. On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice.
2. Enter 9 9 0. The TV key blinks twice.
3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3).

NOTE: If a code digit is 0, the selected mode key does not blink.

4. Repeat step 3 four more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit. F

To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are checking.

Universal Electronics Atlas 5 DVR/PVR

PROGRAMMING DEVICE CONTROL

The Atlas DVR/PVR 5-Device Universal Remote Control is preprogrammed to operate the Scientific Atlanta cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, an RCA VCR (as an AUX
device), and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps:

NOTE: If you have another brand of cable converter or a satellite receiver you would like to control, you'll first need to unlock the cable ID Lock before changing the converter code.

1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
2. On the remote control, press a device key once (i.e.., AUX, DVD, AUD, TV, or CBL); it will blink once. Then press and hold SETUP until the selected mode key blinks twice, then release SETUP.
   Use the Manufacturer's Codes to locate the the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.
   • NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.
3. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one
   that works. If it still does not respond, try searching for the code.
   • NOTE: If the device does not have a POWER key, press the (Play) key.
4. Repeat steps 1 through 4 for each device you want the remote control to operate.

PROGRAMMING TV/VCR COMBO CONTROL

1. Turn on your TV/VCR Combo and insert a video cassette.
2. On the remote control, press AUX once; it will blink once. Then press and hold SETUP until the AUX key blinks twice, then release SETUP.
3. Use the Setup Codes For TV/VCR Combos to locate the brand name and then enter the first four-digit code for your TV/VCR Combo. If you perform this procedure correctly, the AUX key will blink twice.
   • NOTE: If the AUX key did not blink twice after entering the code's last digit, then repeat steps 2 through 3 and try entering the same code again. If you've located a TV/VCR setup code that works for your TV/VCR Combo and a separate TV code is also listed, you'll need to program this code into the remote control to access volume control.
4. Aim the remote control at your TV/VCR Combo and press PWR once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code.

SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to the Atlas DVR/PVR 5-Device Universal Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

For example, to search for a code for your TV:

1. Turn on your TV.
2. On the remote control, press TV once; it will blink once. Then press and hold SETUP untilthe TV key blinks twice, then release SETUP.
3. Enter 9 - 9 - 1.The TV key will blink twice.
4. Aim the remote control at the TV and press PWR once.
5. Press CH+ one or more times and stop when the TV turns off.
   • NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
6. Press SETUP once to lock in the code. The TV key will blink twice.
7. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, AUD, or CBL) for the device you are searching for.

CHECKING THE CODES

If you have set up the Atlas DVR/PVR 5-Device Universal Remote Control using the Searching For Your Code
procedure, you may need to find out which four-digit code is operating your equipment.

For example, to find out which code is operating your TV:

1. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice, then release SETUP.
2. Enter 9 - 9 - 0.The TV key will blink twice.
3. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of times the TV key blinks (e.g., 3 blinks = 3).
   • NOTE: If a code digit is '0', the selected mode key will not blink.
4. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.
5. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, AUD, or CBL) for the device you are checking.

Universal Electronics Atlas XL

PROGRAMMING DEVICE CONTROL

The Atlas XL Universal Remote Control is preprogrammed to operate the cable converter provided by your cable service provider, an RCA TV, an RCA VCR, and a Pioneer audio receiver.  To control devices other than the default brands, perform the following steps:

NOTE: To control a DVD player, program the VCRkey. To control a PVR, program the VCRkey. To control a stereo amplifier or receiver, program the AUDkey. For TV/VCR Combo control, skip this section and perform the PROGRAMMING TV/VCR COMBO CONTROL instructions below. 

1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
2. On the remote control, press a device key once (e.g., AUD, VCR, or TV). Press and hold SETUP until the selected mode key blinks twice, then release SETUP.
3. Use the Manufacturer's Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.
   • If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.
4. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see Searching For Your Code below). NOTE: If the device does not have a POWERkey, press the ( Play) key.
5. Repeat steps 1 through 4 for each device you want the remote control to control. For future reference write down each working device code.

PROGRAMMING TV/VCR COMBO CONTROL

1. Turn on your TV/VCR combo and insert a video cassette.
2. On the remote control, press [VCR] once. Press and hold [SETUP] until the [VCR] key blinks twice, then release [SETUP].
3. Use the Setup Codes For TV/VCR Combos to locate the brand name and then enter the first four-digit code for your TV/VCR Combo. If you perform this procedure correctly, the VCR key will blink twice. NOTE: If the VCR key did not blink twice after entering the code's last digit, then repeat steps 2 through 3 and try entering the same code again. If you've located a TV/VCR setup code that works your TV/VCR Combo and a separate TV code is also listed, you'll need to program this code into the remote control to access volume control (see Programming Device Control).
4. Aim the remote control at your TV/VCR combo and press [POWER] once. The device should turn off. If it does not respond, repeat steps 2 and 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (see Searching For Your Code).
5. For future reference, write down each working device code.

SEARCHING FOR YOUR CODE

1. Turn on your TV.
2. On the remote control, press [TV] once. Then press and hold [SETUP] until the [TV] key blinks twice, then release [SETUP].
3. Enter 9 - 9 - 1. The [TV] key will blink twice.
4. Aim the remote control at the TV and slowly alternate between pressing [POWER] and [TV]. Stop when the TV turns off. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
5. Press [SETUP] once to lock in the code. The [TV] key will blink twice.
6. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (i.e., [AUD] or [VCR]) for the (Audio or VCR) device you are searching for.

CHECKING THE CODES

If you have set up the Atlas XL Universal Remote Control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV:

1. On the remote control, press [TV] once. Then press and hold [SETUP] until the [TV] key blinks twice, then release [SETUP].
2. Enter 9 - 9 - 0. The [TV] key will blink twice.
3. To view the code for the first digit, press 1 once. Wait three seconds and count the number of times the [TV] key blinks (e.g., 3 blinks = and write down the number. NOTE: If a code digit is '0, ' the selected mode key will not blink.
4. Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.
5. To check for other device codes, repeat steps 1 through 5, but substitute the appropriate key (i.e., AUD or VCR) for the (Audio or VCR) device you are checking. Write down the codes.

USING THE MASTER POWER KEY

The Atlas XL Universal Remote Control has a unique feature that allows you to sequentially turn on or off up to four of your home entertainment devices with a single key press. NOTE: [MASTER POWER] requires programming and only works in the [CBL] mode. If it is not programmed, only the cable converter will turn on or off. In any other mode, pressing [MASTER POWER] once will turn on or off the selected device.

To Program The Master Power Key:

1. On the remote control, press and hold [SETUP] until the last-selected device key blinks twice, then release [SETUP].
2. Enter 9 - 9 - 5.The last-selected device key will blink twice. Then press [POWER] once.
3. For the first device you want in the power on sequence, press a device key (e.g., [TV]) once and then press [POWER] once.
4. Repeat step 3 up to three more times to add the second, third, and fourth device, as desired.
5. To save the settings and exit the program, press [CBL] once. Next, press and hold [SETUP] until the CBL key blinks twice, then release [SETUP].

To Operate The Master Power Key:

1. After programming, point the remote control at the devices. Press [CBL] once.
2. Press [MASTER POWER] once to sequentially turn on or off all home entertainment devices.

You will see the devices turn on or off according to the programmed sequence.

To Clear The Master Power Key:

1. Perform steps 1 and 2 in the first section above, To Program The Master Power Key.
2. To clear the settings and exit the program, press and hold [SETUP] until the [CBL] key blinks twice, then release [SETUP].

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control's channel-control capabilities are locked to the cable converter. The affected keys* are 0~9, [CH+], [CH-], [ENTER], and [LAST]. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes

NOTE: This feature does not affect the [AUD] mode.

To De-Activate Channel Control Lock:

1. On the remote control, press [CBL] once. Then press and hold [SETUP] until the [CBL] key blinks twice, then release [SETUP].
2. Enter 9 -7- 3.The [CBL] key will blink twice.
3. Press CH- once. The [CBL] key will blink four times.
4. Now, the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.

To Re-Activate Channel Control Lock:

1. On the remote control, press [CBL] once. Then press and hold [SETUP] until the [CBL] key blinks twice, then release [SETUP].
2. Enter 9 -7- 3.The [CBL] key will blink twice.
3. Press [CH+] once. The [CBL] key will blink twice.

Now, regardless of what mode you select (i.e., TV or VCR), only the channel control capability of your cable converter will be accessible.

Universal Electronics C4000/S4000

Programming Device Control

The C4000 and S4000 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps:

1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
   • Note: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. On the remote control, press a device key once (i.e., AUX, DVD, TV, CBL or STB); it blinks once. Then press and hold SETUP until the selected mode key blinks twice.
3. Use the 'Manufacturer's Codes' to locate the type of device and brand name and then enter the first five-digit code for your device. If performed correctly, the selected mode key blinks twice.
   • Note: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.
4. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see 'Searching for Your Code').
   • Note: If the device does not have a PWR key, press the PLAY key.
5. Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code.

Searching For Your Code

If your home entertainment device does not respond to the C4000 and S4000 Remote Controls after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.
Use the following device code digits to control a specific device:

• 0 = Cable/STB
• 1 = TV
• 2 = DVD/VCR
• 3 = Audio

For example, to search for a code for your TV:

1. Turn on your TV.
2. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice.
3. Enter 9 9 1. The TV key blinks twice.
4. Press 1. (the device code digit for your TV). The TV key blinks twice. Aim the remote control at the TV and press PWR once.
5. Press and release the CH+ key continuously, then stop when the TV turns off.
   • Note: In the search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first.
6. Press PWR. The TV should turn on, then press SETUP to lock in the code.
   • Note: If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SETUP when the TV turns on.
7. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are searching for.

Checking The Codes

1. If you have set up the C4000 and S4000 Remote Controls by searching for your device code, you may need to find out which five-digit code is operating your equipment.
2. For example, to find out which code is operating your TV:
3. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice.
4. Enter 9 9 0. The TV key blinks twice.
5. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = and write down the number.
   • Note: If a code digit is 0, the selected mode key does not blink.
6. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit. Finish writing down the codes.
7. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are checking. Write down the codes.

Universal Remote UR5 8400

Three-Digit Code Programming Method

The remote control can be programmed by pressing in a three-digit code number that corresponds to particular manufacturers and brands of Audio/Video equipment.

1. Turn on the equipment you wish to program. (TV, VCR, DVD or AUX)
2. Press the [DEVICE] button (TV, VCR, DVD or AUX) to be programmed and [SELECT] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed.
   • The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables.
   • The equipment will turn off when the correct three-digit code number has been entered. You can verify you have selected the correct code by pressing the [POWER] button, the equipment should turn on or turn off.
   • Note: If there is more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.
4. Store the three-digit code number by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.

Note: Try all the functions on the remote control. If any of the functions do not work as they should, repeat from Step 2 using the next three-digit code number from the same brand list.

Auto Search Method

If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps:

1. Turn on the equipment you wish to operate.
2. Press the [DEVICE] button (TV, VCR, DVD or AUX) to be programmed and the [SELECT] button simultaneously for 3 seconds. The device LED will turn on.
   • The device LED will turn on for 20 seconds. The next step must be entered while LED is on.
3. Point the remote control toward the equipment and alternately press the [CH+] (or [CH-]) button and the [POWER] button. If the right code number is sent, the equipment will turn off.
   • You can verify that you selected the correct code by pressing the [POWER] button again. The equipment should either turn on or off.
4. Press the same [DEVICE] button to store the code. The device LED will blink twice to confirm that the code has been stored.

To Find the Three Digit Code Number That was Stored in the Device

1. Press the [DEVICE] button (TV, VCR , DVD or AUX) you wish to verify and the [SELECT] button simultaneously for 3 seconds. The device LED will turn on.
   • The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
2. Press the [INFO] button. The device LED will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1 second interval of the LED being turned off.
   • Example: One blink, three blinks and eight blinks with an interval of 1 second of LED being turned off, indicates the code number 138.

Note: Ten blinks is equal to the number 0.

Universal Remote UR5 8400A

Three-Digit Code Programming Method

The remote control can be programmed by pressing in a three-digit code number that corresponds to particular manufacturers and brands of Audio/Video equipment.

1. Turn on the equipment you wish to program. (TV, VCR, DVD or AUX)
2. Press the [DEVICE] button (TV, VCR, DVD or AUX) to be programmed and [SELECT] button simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready to be programmed.
   1. *Tip : The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables.
   • The equipment will turn off when the correct three-digit code number has been entered. You can verify you have selected the correct code by pressing the [POWER] button, the equipment should turn on or turn off.
   • Note: If there is more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.
4. Store the three-digit code number by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.

Note: Try all the functions on the remote control. If any of the functions do not work as they should, repeat from Step 2 using the next three-digit code number from the same brand list.

Auto Search Method

If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps:

1. Turn on the equipment you wish to operate.
2. Press the [DEVICE] button (TV, VCR, DVD or AUX) to be programmed and the [SELECT] button simultaneously for 3 seconds. The device LED will turn on.
   • The device LED will turn on for 20 seconds. The next step must be entered while LED is on.
3. Press the [CH+] or [CH-] button one at a time or keep it pressed. The remote will emit a series of power on/off commands. Release the [CH+] or [CH-] button as soon as the equipment turns off.
   • You can verify that you selected the correct code by pressing the [POWER] button. The equipment should either turn on or turn off.
4. Press the same [DEVICE] button to store the code. The device LED will blink twice to confirm that the code has been stored.

To Find the Three Digit Code Number That was Stored in the Device

1. Press the [DEVICE] button (TV, VCR , DVD or AUX) you wish to verify and the [SELECT] button simultaneously for 3 seconds. The device LED will turn on.
   • The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
2. Press the [INFO] button. The device LED will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1 second interval of the LED being turned off.
3. Example: One blink, three blinks and eight blinks with an interval of 1 second of LED being turned off, indicates the code number 138.

Note: Ten blinks is equal to the number 0.

Universal Remote UR2-DTA

Quick Set-Up Method

1. Turn on the device you want to program-to program your TV, turn the TV on.
2. Point the remote at the TV and press and hold TV key for 3 seconds. while holding the TV key, the POWER LED will light off and on again. Begin to press the number keys, one at a time, starting with 1, then 2, 3, ...0 until the TV turns off.
3. Release the TV key to save the code. The POWER LED will blink twice to confirm the code is stored.

Pre-Programmed 3-Digit Code Method

1. Turn on the Component you want to program (TV, DTA)
2. Press the [COMPONENT] button (TV or DTA) to be programmed and OK button simultaneously for 3 seconds. The POWER LED light will turn on for 20 seconds indicating the unit is ready to be programmed.
3. Point the remote control toward the Component and enter the 3-digit code number assigned to your brand. If the 3-digit code number you just entered is correct, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for the brand until the Component turns Off.
4. After you've entered the correct code number and the Component has turned Off, press the [POWER] button to turn the Component back On. Now it is time to test the VOLUME and MUTE buttons for the TV to make sure they all work. If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand until you find the best code.
5. Once you have found the correct 3-digit code, save it by pressing the same [COMPONENT] button one more time. The POWER LED light will blink twice to confirm that the code was successfully stored.
   

Universal Remote UR3-SR3M / UR3-SR3S

Pre-Programmed 3-Digit Code Method

1. Turn on the Component you want to program (TV, VCR, DVD or AUX) .
2. Press the [DEVICE] button and the [SELECT/OK] button simultaneously for three seconds. The corresponding device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on. 
3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off. 
   • Note: If the 3-digit code number you just entered is correct, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off.
4. After you've entered the correct code number and the Component has turned Off, press the [DEVICE] button to turn the Component back On.
5. Now it's time to test the VOLUME and MUTE buttons for the TV (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand.
6. Store the three-digit code by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.

Note: If the Pre-Programmed Method did not work, or if the Code Tables do not list your Component brand, use the Auto-Search Method.

Auto-Search Method

1. Turn on the Component you want to program (TV, VCR, DVD or AUX).
2. Press the [DEVICE] button and the [SELECT/OK] button simultaneously for three seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.
3. Point the remote control toward the equipment and alternately press the [CH+] (or [CH-]) button and the [MUTE] button. If the right code number is sent, the equipment will turn off.
4. Test functions. (Same as for 3-Digit Code Programming Method). You can verify that you selected the correct code by pressing the [MUTE] button again. The equipment should turn On or Off. If any of the functions do not work as they should, repeat from STEP 3 using [CH +] or [CH -] buttons to find the correct code.
5. Press the same [DEVICE] button to store the code. The Device LED will blink twice to confirm that the code has been stored.
6. Now, repeat the Auto-Search Method for those Components you could not program earlier with the Pre-Programmed Method.

Universal Remote UR3-SR2

Pre-Programmed 3-Digit Code Method

1. Turn on the Component you want to program (TV, VCR, DVD or AUX) .
2. Press the [DEVICE] button and the [SELECT/OK] button simultaneously for three seconds. The corresponding device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on. 
3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.
   • Note: If the 3-digit code number you just entered is correct, the Component will turn Off. If i