Dell Wireless Printer WiFi Connection

Follow the Steps below to connect your Dell Wireless Printer to your Charter WiFi.

Even though the printer will be used wirelessly it is recommended to install it using a USB cable first then setting up the printer for a wireless connection.

1. Click USB cable.
2. Connect the USB cable from the computer to the printer following the instructions on the screen, click Continue.
3. (It may take a few minutes for the drivers and hardware to be installed)
4. If no beeps are heard and the hardware installation bubbles do not appear, click "I connected the cable but cant click Continue" for additional information.
5. If the new hardware wizard window opens, click Cancel)

If the Wireless Network Name Appears in the List

1. Click on your network, then click Continue
2. Enter your WiFi password (If applicable) then click Continue
3. Review and make sure the settings are correct (If not, click back to make the changes), then click Continue. (The printer is configured and connects to the wireless network)
4. The Allow Dell Software window may appear, if so read the instructions, write down any notes needed, then click OK
5. When instructed remove the USB cable from the computer and printer
6. Click Finish

The printer is now connected to the wireless network. (The installation process is complete)

If the Wireless Network Name Does Not Appear in the List

1. Click Unlisted Network
2. Enter your Network Name then click Continue
3. Select the type of Network Security the wireless router has, then click Continue
4. Enter your WiFi password (If applicable) then click Continue
5. Review and make sure the settings are correct (If not, click back to make the changes), then click Continue. (The printer is configured and connects to the wireless network)
6. The Allow Dell Software window may appear, if so read the instructions, write down any notes needed, then click OK
7. When instructed remove the USB cable from the computer and printer
8. Click Finish

The printer is now connected to the wireless network. (The installation process is complete)