Magnavox 5200 Series Blu-Ray Player WiFi Connection

Follow the Steps below to connect your Magnavox Blu-Ray Player to your Charter WiFi.

For models

• MBP5210
• MBP5220F

Wireless Connection

1. Use ^/v/</> to select Network Setup in the home menu and press OK
2. Use ^/v to select Wireless and press OK
3. Use ^/v to select Auto Scan and press OK (Your Magnavox Blu-Ray player will begin searching for wireless networks)
4. The available wireless networks will be displayed. Use ^/v to select your network name and press OK. If you select a network name with a  (Open Lock) go to Step 6

5. The WEP/WPA Key entry screen will appear. Enter your network key (WiFi password) using the cursor buttons, number buttons and color key. When finished, press Red

6. Use ^/v to select Next and press OK

7. Use ^/v to select Auto and press OK
8. Select End to activate the network settings and set the network connection automatically

Wired Connection

1. Connect one end of an Ethernet cable to the LAN port on your Magnavox Blu-Ray Player

2. Connect the other end of the Ethernet cable to an open LAN port on your Charter WiFi gateway.

Note: The gateway pictured is just an example. The steps listed should work correctly for all gateway types

3. Use ^/v/</> to select Network Setup in the home menu and press OK
4. Use ^/v to select Wired and press OK
5. Use ^/v to select Auto and press OK (Your Magnavox Blu-Ray player will start a connection test automatically. The test results will appear after the test finishes)
6. Select End to activate the network settings and set the network connection automatically